A leading manufacture of OEM Approved Synthetic and Specialty Lubricants. Custom Formulations. Worldwide Partnerships. Join Our Team. Click Here for Details. Product Application

TACO

TACO - Series of oils have been formulated to extend oil drain intervals and reduce residue buildup. This family of semi-synthetic compressor oils offer many of the advantages of a 100% synthetic oils at a lower cost.

Lead Manufacturer in OEM Approved Synthetic and Specialty Lubricants. Custom Formulations. Worldwide Partnerships. Join Our Team. Click Here for Details.

TACO Air Compressor Oil Series

TACO series of compressor oils are TTL’s family of semi-synthetic oil which offer many of the advantages of a fully synthetic oil at a lower cost. TACO’s are formulated from a combination of synthetic fluids, high viscosity index (hydro-treated) oils and TTL’s proprietary additive technology.

Extended drain intervals in Rotary, Vane, Centrifugal and Reciprocating Compressors are recorded regularly. Monitoring by oil analysis is recommended to properly determine oil drain intervals that may be extended up to 6,000 hrs in elevated temperatures.

TACO oils will eliminate compressor and pump downtime by minimizing the harsh buildups experienced with the use of conventional oils.

These oils have better polar film lubricity and lower volatility than conventional oils. This permits lower reciprocating cylinder feed rates with less oil carry-over into the air stream, and more complete air/oil separation. The result is cleaner system air, reducing problems in air operated equipment and manufacturing processes.

TACO formulation are compatible with all known gasket and seal material and are non-reactive with materials found downstream, such as polycarbonate bowl, elastomers and paints. TACO formulations are totally compatible with mineral oils, but for maximum performance, TACO lubricants should be used exclusively and should not be mixed or diluted with existing product.

Typical Properties

PRODUCTTACO 32TACO 46TACO 68TACO 100TACO 150
ISO VG324668100150
Specific Gravity0.840.850.850.870.87
Viscosity
cSt @ 400C324668100150
cSt @ 1000C5.77.39.612.717
SUS @ 1000F150214315464695
SUS @ 2100F4550586986
Viscosity Index119120121122122
Flash Point COC 0F/0C480/249480/249505/263515/268525/294
Pour Point 0F/0C-37/-38-37/-38-30/-34-25/-32-20/-29
Autoignition Temp. 0F/0C710/377710/377715/382720/382735/391
4 Ball Wear-1200rpm
(1670F/750C, 40kg/1hr.)
scar diameter, mm
0.46
0.46
0.43
0.43
0.41
Copper Corrosion, 24hrs.1A1A1A1A1A
Total Acid Number0.110.110.110.110.11
Evaporation Loss, % by wt.
(1750C/3470F, 72hrs)
< 9
< 9
< 8
< 7
< 7
Demulsibility, 1300F/540C
ml Oil/Water/Emulsion
(Minutes)
40/38/2(10)
40/38/2(10)
40/38/2(10)
40/38/2(15)
40/38/2(15)