GENERAL PURPOSE OILS
T-10/50
Designed for a wide range of general lubrication; from small and medium sized gear drives, to bearings, cams, ways, pumps, chain baths, and slide configurations. Used in drip cups, automatic lube systems and oil cans. T-10/50 will out-wet water and gives exceptionally long life, rust and corrosion protection for a variety of applications including circulating systems.
- Non-drip/Non-foaming
- High VI's
- Increased equipment efficiency and life
- Rust and corrosion protection
- Extra Non-Drip (END)
T-10/50 SP
SP Semi-synthetic economical alternative to straight mineral oil lubricants. Proven to out-perform mineral oils in every important category. A true multi-grade, multi-purpose oil designed for general plant wide use.
- Oxidation resistant
- Anti-wear and EP film strength
- Low evaporation
- Rust and corrosion protection
- Non-drip
- Increased equipment efficiency
- Reduced consumption and inventory
T-7000 Multi-Application Oils
Formulated for multi-application in any plant with maximum anti-wear protection and long life. The synergistic blending of high quality petroleum and synthetic base fluids guarantees diversity and superior service plant wide. T-7000 Series Oils have been formulated for exceptional oxidation resistance, rust protection and foam control. Compatible with conventional petroleum lubricants. T-7000 Oils make inventory control simple.
- Anti-Wear Protection
- Excellent Oxidation Resistance
- Increased Equipment Efficiency and Life
- Non-Drip/Non-Foaming
Typical Applications T-7000
Light Loaded Gear Boxes • Hydraulics • Air Compressors • Chains
T-ATO Air Tool Oils
These special water-absorbing oils are for use in all types of air tools and pneumatic equipment. T-ATO “sponges” moisture and condensation out of air-operated equipment with its unique additive package. T-ATO can absorb up to 10% of its own weight in water. These oils extend air-tool life with superior anti-wear and EP performance.
- Prevent Equipment Seizure
- Cleans existing gummy deposits left by hydraulic, motor and light machine oils
- Eliminates power robbing deposits
- Low Temperature/Non-Freeze (ATO-22LT)
- Food Grade Formula (ATO-32FG)
- NSF H1 Registered Food Grade Formula (ATO 32 FG)
Typical Properties
| Product | T-10/50 | T-10/50 Sp | T-7032 | T-7046 | T-7068 | T-7100 | T-7150 | T-7220 | T-ATO 32 | T-ATO 22 |
|---|---|---|---|---|---|---|---|---|---|---|
| ISO VG | 100 | 100 | 32 | 46 | 68 | 100 | 150 | 220 | 32 | 22 |
| Viscosity | ||||||||||
| cSt @ 40 0C | 95 | 95 | 32 | 46 | 68 | 100 | 150 | 220 | 32 | 19 |
| cSt @ 100 0C | 12.2 | 10.9 | 5.3 | 6.7 | 8.7 | 11.2 | 14.7 | 19.3 | 5.6 | 2.9 |
| SUS @ 100 0F | 440 | 440 | 150 | 214 | 315 | 463 | 695 | 1019 | 150 | 94 |
| SUS @ 210 0F | 67 | 62 | 44 | 48 | 55 | 64 | 77 | 96 | 45 | 36 |
| Viscosity Index | 121 | 100 | 96 | 97 | 99 | 97 | 97 | 99 | 114 | - |
| Flash Point 0F/0C | 450/232 | 425/218 | 425-218 | 425-218 | 425-218 | 450/232 | 450/232 | 450/232 | 430/221 | 380/193 |
| Pour Point 0F/0C | -31/-35 | -25/-32 | -25/-32 | -25/-32 | -20/-29 | -20/-29 | -15/-26 | -7/-22 | -18/-28 | -60/-51 |
| 4 Ball Wear - 1200rpm | ||||||||||
| (167 0F/75 0C, 40kg/1hr.) Scar Diameter, mm | 0.41 | 0.41 | 0.43 | 0.43 | 0.43 | 0.43 | 0.43 | 0.43 | 0.43 | 0.43 |