TACO D
TACO D
TACO D synthetic diester compressor oils are designed to provide long term lubrication. Formulated to eliminate sludge, varnish, shellac and carbon deposits at elevated temperatures.
TACO D are blended from a combination of premium synthetic base fluids and are combined with proprietary additive technology. TACO D fluids have inherent oxidative stability which provides maximum protection against the continuous operation at elevated temperatures.
TACO D oils are designed for use in compressors and pumps with extended drain intervals of 8,000 trouble free hours. These oils will reduce operating temperatures and power consumption by providing superior lubricating films that permit more efficient equipment operation.
TACO D oils possess high flash and auto-ignition points for added safety in high temperature applications. TACO D will help eliminate oil filter clogging, carbon deposits on exhaust valves and serve as a year round lubricant, eliminating need for heaters in remote locations.
TACO D Compressor Oil
- Excellent Oxidative Stability
- Extended Drain Intervals
- Superior Anti-Wear Protection
- Eliminates Sludge, Varnish & Carbon Deposits
- Excellent Dispersing Ability
DIESTER COMPATIBILITY GUIDE
RECOMMENDED:
High Nitrile Buona N. Teflon, Epoxy Paint, Viton, Oil Resistant Alkyd, Nylon, Delrin, Celcon
NOT RECOMMENDED FOR:
Neoprene, SBR Rubber, Lacquer, PVC, ABS, Low Nitrile Buona N, Acrylic Paint, Polystyrene.
NOTE: ISO 32, 46, 68, 100 and 150 for use in oil flooded Rotary Vane and Screw Compressors.
NOTE: ISO 100 for use in reciprocating compressors, crankcase and cylinder lubrication.
Typical Properties
| PRODUCT | TACO 32D | TACO 46D | TACO 68D | TACO 100D | TACO 150D |
|---|---|---|---|---|---|
| ISO VG | 32 | 46 | 68 | 100 | 150 |
| Specific Gravity | 0.91 | 0.91 | 0.94 | 0.95 | 0.96 |
| Viscosity | |||||
| cSt @ 400C | 32 | 46 | 68 | 100 | 150 |
| cSt @ 1000C | 5.9 | 7.7 | 8.3 | 14 | 13 |
| SUS @ 1000F | 150 | 214 | 315 | 464 | 695 |
| SUS @ 2100F | 46 | 51 | 53 | 59 | 70 |
| Flash Point COC 0F/0C | 480/249 | 480/249 | 519/270 | 519/270 | 520/271 |
| Pour Point 0F/0C | -70/-57 | -70/-57 | -50/-45 | -45/-43 | -30/-34 |
| Autoignition Temp. 0F/0C | 750/399 | 750/399 | 755/401 | 755/401 | 785/418 |
| 4 Ball Wear-1200rpm | |||||
| (1670F/750C, 40kg/1hr.) scar diameter, mm | 0.46 | 0.46 | 0.44 | 0.44 | 0.44 |
| Copper Corrosion, 24hrs. | 1A | 1A | 1A | 1A | 1A |
| Total Acid Number | 0.19 | 0.19 | 0.19 | 0.19 | 0.19 |
| Evaporation Loss, % by wt. | |||||
| (1750C/3470F, 72hrs) | < 2.5 | < 2.5 | < 2.5 | < 2.5 | < 2.5 |
| Demulsibility, 1300F/540C | |||||
| ml Oil/Water/Emulsion (Minutes) | 40/40/0(10) | 40/38/2(10) | 40/37/0(15) | 39/38/3(60) | 39/38/3(60) |
