HIGH TEMPERATURE GREASES

T-707 High Speed/High Temperature Non-drip feature makes this grease desirable for high speeds and temperatures. Made from a combination of ashless, inorganic thickener and a blend of synthetic base fluids which were originally developed for jet aircraft use. Available with Graphite, T-707G. • High speed • Non carbonizing • Cleans as it lubricates Red Gold Constant High Temperature Use High viscosity synthetic base fluids with an ashless inorganic thickener. High temperature sealed for life bearings. Exceptional in oven and tenter frame bearings where temperatures constantly exceed 350°F/177°C. • Red color for easy identification • Slow to medium speeds • Extended lube cycles • Extends both bearing and shaft life TRI 1-2-3 HT Made from a blend of special synthetic fluids for non-carbonizing performance in high temperatures. TRI 1-2-3HT is formulated to clean prior carbon deposits as it lubricates. Excellent for a variety of applications in plain, journal and anti-friction bearings. Recommended for ovens, tenter frames, hot air exhaust fans, dryers, and overhead trolley bearings used in the appliance and automotive industry. • Medium-high speeds • Non-carbonizing clean • Non hardening • AW/EP • Extended bearing and shaft life Black Gold A combination of medium viscosity synthetic base oils, anti-wear additives and high temperature solids. Formulated to handle the mid to high ranges of speed and temperature where T-1-2-3 HT leaves off. Exceptional resistance to heat and moisture and ideal for applications where drippage cannot be tolerated. • Controlled volatility extends lube cycles • Medium to high speeds • Plain, journal and anti-friction bearings • Lubricating solids

PRODUCT	TRI 1-2-3 HT	Black Gold	T-707	Red Gold
NLGI	2	2	2	2
Base Oil Viscosity cSt@ 40°C cSt@100°C SUS@100°F SUS@210°F	422 33 2200 159	149 17.9 750 91	64.4 10.3 325 61	544 46 2800 218
Color	Amber	Gray	Green	Red
Solids	-	Graphite	-	-
Thickener	Inorganic	Inorganic	Inorganic	Inorganic
Drop Point °F/°C	None	None	None	None
Timken Load Wear Test OK Load, kg/lbs	34/75	32/70	32/70	23/50
Operating range °F °C	-5/450 -20/232	-30/525 -34/274	-25/600 -32/315	-20/500 -29/260

All greases available in Standard NLGI Grades.
Important: Optimum lubrication cycles for high temperature greases are accurately determined by close monitoring for the first 3-6 months.
Extended cycles of 3 & 5 to 1 are normal for Tribology/Tech-Lube greases.