grease-oils-lubricants-heat sink compounds-industrial grade

Compressor Oils
High Temp Chain Oils
General Purpose Oils
Hydraulic Oils
Roller Chain Oils
Multi-Purpose Greases
High Temp Greases
Special Application Greases
Anti-Seize Compounds
Heat Sink Compounds
Food Grade Oils & Greases
NSF Approved Lubricants
Food Grade Gear Oil
Food Grade Multi-Purpose Hydraulic Oils
Food Grade Special Application Lubricants
Food Grade Compressor Oils
Food Grade Air Tool Oil
Food Grade Bakery Oven Chain Lubricants
Food Grade Multi-Purpose Greases
Food Grade Contamination Resistant Greases
Food Grade Special Application Greases
Food Grade Semi-Fluid & Open Gear Greases
Printing Industry
Oil Analysis
Lubrication Accessories
Diagnostics
Product Application Form
Email Us
Tribology Inc. Tech-Lube
Tribology Inc. Tech Lube
Tribology Home Page


grease-oils-lubricants-heat sink compounds-industrial grade

FOOD GRADE OILS
BAKERY HIGH TEMP OVEN CHAIN LUBRICANTS - USDA H2

 

FGBL 180
FGBL 180 is a smokeless, odorless high temperature chain oil formulated with finely powdered natural graphite and a highly refined carrier. The fine graphite powders used in the FGBL family of oils actually gain in lubricating strength as the temperatures increase! This chain oil has the ability to penetrate and coat all moving parts, assuring trouble free operation and reduced frictional drag.

The liquid carrier evaporates without smoke or residue and the odorless feature of FGBL 180, minimizes any possibility of operator complaints. This multi-purpose chain oil will not burn or char under high oven temperatures. It is excellent for traveling hearth bread ovens, traveling chain biscuit ovens, traveling tray bread ovens, and rotary and reel ovens.
• Odor free
• High flash point
• Minimal pre-lube agititation

• Economical
• Reduces chain drive amperage and wear
• Minimizes operator complaints.

FGBL 300
FGBL 300 is a non-flammable, fire resistant oven chain lubricant designed for use on ovens that cannot be cooled down for proper lubricating procedures. The special combination of a fine graphite powder and blended synthetic carrier causes a smooth and rapid conveyance of the lubricant to all friction points on oven chains.
FGBL 300 can be applied to hot oven chain systems, up to 300°F/149°C. The graphite lubricating film minimizes chain drag and friction between all moving parts, reducing power consumption and overload stoppage.
• No Flash Point
• Reduces expensive downtime
• Energy efficient
• Apply to hot chains
• Fire resistant
• No residues

FGBL 300HT
FGBL 300HT is a synergistic blend of highly processed graphite powders and a selected, synthetic carrier. This oil is engineered to give "full-film" dry lubrication between all chain systems parts, in temperatures up to 1600°F/871°C!

FGBL 300HT will not carbonize or produce gummy, power robbing deposits and can be applied safely to "hot chains. " The synthetic carrier assures rapid and complete
penetration into all chain partswithout the use of solvents.
• Eliminates expensive downtime
• Contains no petroleum products
• Apply to chains up to 300°F/149°C
• Will not carbonize
• Friction and noise reduction

FGBL 300HTX
FGBL 300HTX is designed to give added protection for "high temperature - highly loaded" oven chain systems. The extra EP fortified formula of HTX assures maximum metal-to-metal separation. The engineered combination of blended synthetic oils and additives, gives FGBL 300HTX a powerful cleaning action that breaks down and dissolves prior carbon, varnish and gum buildup.
FGBL 300HTX is clear in color and has an ISO 320 rating and can be applied by any conventional lubricating method.
• EP protection
• No harmful deposits
• Maximum anti-wear
• Extended part life
• Power reduction
• 425°F/218°C temperature range
PRODUCT
LUBRICATION
TEMPERATURE
RANGE
BASE OIL OR
CARRIER
USDA RATING
T-FGBL 180
Up to 180°F/82°C
Odorless
volatile
liquid
H2
T-FGBL 300
For best results*
Over 200°F/93°C
Less than 350°F/177°C
Fire
Resistant
Synthetic
H2
T-FGBL 300HT
For best results*
Over 200°F/93°C
Less than 350°F/177°C
Non-Carbonizing
Synthetic
H2
T-FGBL 300HTX
Up to 425°F/218°C
Synthetic
H2
*Always apply to chain systems in open, ventilated areas within listed temperature ranges.

 

 

Manufacturers of synthetic and semi-synthetic lubricating materials for printing, mining, bottling, packaging, textile, food, pharmaceutical, plastics, injection molding, baking, utilities, power generating, resource recovery, steel, chemical, manufacturing, and distribution industries.

 

Tribology / Tech-Lube Inc.
Email: info@tribology.com
Tel: 631-345-3000 • Fax: 631-345-3001
35 Old Dock Road, Yaphank, NY 11980