grease-oils-lubricants-heat sink compounds-industrial grade

HI-TEMPERATURE CHAIN OILS

T-3800 HT Hi-Temp Synthetic Chain Oil 525°F/274°C T-3800 HT chain oils exhibit excellent anti-wear characteristics and power savings through friction reduction. 3800 series oils are ashless, smokeless products with no carbon, varnish or gummy residues at higher and continuous temperatures. T-3800 HTM with molybdenum disulfide in colloidal suspension. T-3800 HTT with micron particles of PTFE in colloidal suspension • Low volatility • Extended lube cycles • Self cleaning • USDA H2 approved		T-911 HT Synthetic/Metallic Hi-Temp Fluid 425°F/218°C A combination of synthetic oils and submicron molybdenum disulfide for maximum lubrication of all moving parts on all chain designs. The synthetic fluids have a powerful cleaning action that breaks down and dissolves prior carbon, varnish and gum buildup! • Energy efficient • Anti-Wear • Ashless-No residue • Extends chain and track life • T-911 Clear-No Moly formulation

T-909HT Hi-Temp Fluid 325°F/163°C Medium viscosity, semi-synthetic, high temperature chain lubricant. Excellent adhesion, good spreading properties and superior anti-wear protection. • Economical • Long life lubrication • Available with Moly or Graphite packages		T-919HT High-Temp Fluid 375°F/190°C T-919 HT is formulated with 100% synthetic fluids that will insure clean chain and track operation. This economical High Temperature Chain Oil uses the highest quality ester, high viscosity index oils and combined with TTL's proprietary additive package for superior anti-wear and oxidation protection. • Excellent Oxidation Stability • Anti-Wear Protection • Reduce Downtime

T-38150 HT T-38220HT & T-38320HT Hi-Temp Synthetic Chain Oil 525°F/274°C All the same advantages of T-3800 HT, with heavier viscosity base fluids for added load carrying protection and higher chain speeds. Also available with M-Moly, T-PTFE, and G-Graphite packages.		Applications High-temperature ovens •Tunnels •Dryers •Tenter frames •Shrink wrap machines •Textile auxiliaries •Steel •Plastic •Printing and woodworking processes

Product	T-909HT	T-911HT	T-919	T-3800HT	T-3150HT	T-38220HT	T-38320HT
ISO VG	220	100	68	68	150	220	320
Viscosity cSt@40°C cSt@100°C SUS@100°F SUS@210°F	231 21.4 1070 105	106 13.2 491 71	68 9.8 339 62	73 10.7 365 62.8	150 18.2 695 91	220 24.1 1019 116	320 31.2 1482 148
Viscosity Index	110	121	125	135	136	137	135
Flash point COC °F/°C	460/238	485/251	482/250	545/285	545/285	550/287	550/287
Autoignition °F/°C	650/343	675/357	655/346	794/423	794/423	799/425	799/425
Pour point °F/°C	-15/-26	-35/-37	-4/-20	-35/-37	-30/-34	-25/-32	-25/-32
4 ball wear-1200rpm (167°F/75°C, 40 kg/1hr.) scar diameter, mm	.45	.43	.43	.41	.41	.41	.40
Evaporation loss (14 hrs at 400°F)	12.0	6.0	6.0	2.0	2.0	2.0	<2.0